Improvements

• Self-control mechanism during the Power-up sequence added
• ISO14443: reader and emulator handle FSC/FSD up to 4096 bytes (256 bytes before)
• JISX6319 : PICC demodulation
• ISO15693 : PICC and PCD decoding
• ISO18092 : ProxiLAB should be able to send a RSL_REQ without DID field
• Spy logger handle frames up to 4096 bytes (1024 bytes before)
• Power level can now be specified in percent for more precision
• A residual power field can be specified when RF is off
• Maximum waveform overshoot is up to 200% of high level (125% of low/high level before)
• API functions for ALM (Active Load Modulation) and subcarriers
• VNA : reduced calibration save and reload time, new enable/disable port extension API

 Fixes

• ISO15693: TX logger in emulator mode (first byte of PICC frame not logged)
• AWG noisy output (due to DAC configuration)
• JISX6319: Some Write commands were analyzed as UNDECODED FRAME even though they were correctly formatted
• Administrator mode is not required anymore to update ProxiLAB licenses with a .key file
• Some ISO14443 Type B frames were mistakenly decoded as Innovatron (B prime) frames
• ISO14443-B analyzer : analysis of ATTRIB command will now display correct warning messages
• ISO14443-B analyzer : glitch under 20us are ignored
• ISO18092 analyzer : the warning "Bits b4-b7 shall be set to 0, all other values are RFU" was wrongly displayed for ATR_RES frames
• ISO18092 : bitrate management fix
• APDU : details now available in description view
• S-Param : correctly displayed in description view
• ISO15693 : PCD frame length should not vary with pause length
• ISO15693 : fixed CRC computation in description view
• ISO14443 : the warning "Bit b4 of PCB is set but CID is not present" was wrongly displayed

Known limitations:

• This version of ProxiLAB software does not support PCSC features

Before updating your equipment, and due to the self-control mechanism during the power-up sequence, make sure you have returned your equipment for the annual control & calibration. Please contact our support team for more information support@keolabs.com.