SC-ProxiLAB

Buy Support Contract Extension

http://www.keolabs.com/keolabs-support.html#renew

Product Catalog

http://www.keolabs.com/keolabs-platforms.html

Firmware/Driver installation for ProxiLAB emulator and reader platform (supports ProxiLAB Quest).

In addition to this Firmware/Driver installation, ProxiLAB users should also download and install the following software for complete installation:

  • For ProxiLAB Quest:

    • RGPA (trace viewer dependencies)

    • Quest (New KEOLABS tools graphical interface)

    • ProxiLABForQuest (ProxiLAB dependencies for Quest)

           => install in the following order RGPA -> Quest -> ProxiLAB -> ProxiLABForQuest.

Refer to “Related Products” tab to access the corresponding software versions.

License Activation

If you are updating software, the ProxiLAB software will not function if your technical support contract has ended. End of the technical support contract is one year after purchase and activation. The "Support End Date" is provided on your Home page under "My Products."

To activate ProxiLAB, install the PC software, register the software and activate its license.

  1. Install the software on your PC.
  2. Connect ProxiLAB to a USB port on your PC.
  3. Launch the software and follow the instructions provided in Quest or RGPA interface.

Product Versions

Product Version Name Date of publication Description Patches / Related Products
4.55.0_260828 September 4, 2026
The following changes have been made since version since version 4.54.0 NEW: The PICC emulator...

The following changes have been made since version since version 4.54.0

NEW:

  • The PICC emulator can ignore field variations (PCD dynamic power field) during the deaf time after field-on detection,
  • The acquisitions of the ProxiLAB Quest and the ContactLAB can be synchronized with the ProxiLAB.Spy.StartSynchronized method.

IMPROVED:

  • Demodulation of ALM PICC improved,
  • Optimization of the PCD waveforms loading time, 
  • Optimization of the setup time of the Settings.LoadDefaultConfig method,
  • PCD FeliCa frame decoding improved,
  • WaitAndGetFrame support for Type A VHBR PCD frames,
  • Pattern-filter handling for Type A VHBR PCD frames,
  • Analyzer better detects optional SOF/EOF for Type B PICC frames.
FIX:
  • The define of output source for an IO configured as an input,
  • Timer1 instability in sequencer mode,
  • Suspected ALM drift reset impact when subcarrier is turned off,
  • Trigger-based response handling for VHBR Type A communication sequences,
  • LoadEventResponse preventing responses from being sent to Type A VHBR PCD frames after trigger detection.

Please contact our support team for more information support@keolabs.com.

 Patches:

Related Products:
More versions
Product Version Name Date of publication Description Patches / Related Products
3.02.12.0067 March 13, 2012
PICC emulator mode : - Added LoadDefaultConfig functions for PICC emulator protocols - Fixed...

PICC emulator mode :
- Added LoadDefaultConfig functions for PICC emulator protocols
- Fixed Append CRC/LoadATQC for Felica
- Reset Trigger complex if change NbSteps value
- Fixed full collision functionality
- Fixed Error 14339 during IBlock type A with ASK reader
- No more response in emulator mode, if no IBlock loaded

Reader mode :
- Fixed Error 217 on SendTcl
- Fixed bitrate in SendTransparent cde in Felica reader mode with sequencer active
- Field stability improvement at high power level
- Fixed too long timeout in type B SendTransparentCommand function

Common :
- Changed GetFrameType return in accordance with trace displays
- Added triggers on ISO15693 reader and PICC emulator modes
- Added warning message on beta versions
- Fixed analyser type A bug with high bit rates
- Changed ISO15693 PICC colour in RGPA trace
- Minimum delay time functions improvement in Toolbox

 Patches:

Related Products:
SC-RGPA 2.5.1049
SC-RScript 1.0.89
3.0.0.2771 December 22, 2011
Emulator mode: - Fixed 2770 regression on pattern filters Common: - Improvement of "Programming...

Emulator mode:
- Fixed 2770 regression on pattern filters

Common:
- Improvement of "Programming Guide" documentation

 Patches:

Related Products:
SC-RGPA 2.5.1049
SC-RScript 1.0.382
3.0.0.2770 November 28, 2011
Reader mode : - Fixed full sequencer fifo error missing - Fixed missing RF_POWER events - Fixed...

Reader mode :
- Fixed full sequencer fifo error missing
- Fixed missing RF_POWER events
- Fixed Type B high bit rates values saving in Reader Transparent command tab
- Improvement of bridge demodulation quality (V3)

Emulator mode :
- Fixed unexpected SWTX when emulator state machine disable
- Emulator can send uncompleted bytes (Type A)
- Increase the number of pattern filter timings (new example available)

Common:
- Fixed trace delay error (V3)
- Remove of unexpected calibration popup (V2)
- Complex Triggers (V2)
- Improvement of "Programming Guide" documentation

 Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.382
3.0.0.2765 August 2, 2011
Reader - Protocol B' available - Add property ProxiLAB.Reader.PowerRisingTime Emulator - Add...

Reader
- Protocol B' available
- Add property ProxiLAB.Reader.PowerRisingTime

Emulator
- Add property ProxiLAB.Emulator.ISO14443.TypeB.Timing.EGT
- Add property ProxiLAB.Emulator.ISO14443.TypeB.Timing.EOFLowDuration

Update of documentation Programming Guide:
- EGT
- EOF type B
- RXTXDelay
- PowerRisngTime
- TypeB' SendTransparentCommand

 Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.382
3.0.0.2762 July 13, 2011
- Timer measurement - EGT Emulator Type B : 0-65535/fc

- Timer measurement
- EGT Emulator Type B : 0-65535/fc

 Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.382
3.0.0.2761 July 11, 2011
PICC Emulator - Type A & B SPY

PICC Emulator
- Type A & B SPY

 Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.382
3.0.0.2760 June 23, 2011
Improvements - Add Display.OutputFile to save RGPA Output messages - Add Property ProxiLAB.Settings...

Improvements
- Add Display.OutputFile to save RGPA Output messages
- Add Property ProxiLAB.Settings.InputX, X = 1/2/3/4 to read the logic value on sma connectors
- RXTXDelay on ProxiLAB V2
- Add the RGPA script interface documentation in the install

Bugs corrections
- Reader TypeB High Speed
- Noise Carrier has been decreased
- PICC Emulation works
- Select command not working by script
-

Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.89
3.0.0.2747 January 20, 2011
17/01/2011

17/01/2011

 Patches:

Related Products:
SC-RGPA 2.5.1047
SC-RScript 1.0.382

Add-ons

No Add-ons

Documents

No Documents